Customers can choose different models of oil filter according to the specific filtering requirements. Advanced equipment, simple operation, helps deep filtration of transformer oil, and to the greatest extent to solve the troubles of transformer oil filtration.

Transformer oil filtration process

The online transformer oil filtering program is performed by the Transformer Oil Filtration Machine. During the transformer oil filtering process, the transformer oil enters the preliminary filter under the influence of the internal and external pressure difference, and the large particles impurities in the oil are filtered out in the early filter. The transformer oil is heated by multi -stage infrared vacuum oil device and enters the vacuum separator. In the vacuum separator, the fog first is formed, and then the film is formed, so that the contact area of ​​the real vacuum expands hundreds of times the original.

The moisture in the transformer oil is quickly vaporized under high -speed, high vacuum, and large surface area and then discharged from the vacuum system.

The water vapor discharged from the upper part of the vacuum separator is first cooled through the condenser and dehumidified, and then entered the cooler to cool again. After two condensation and dehumidification, the gas is finally discharged into the air through the vacuum pump.

Vacuum vaporization and dehydration are raised from negative pressure to positive pressure through the oil pump, and discharged from the oil port after fine filtering.

The above is the standard program for Transformer Oil Filtration.