A gas spring happens to be an industrial accessory that acts as a buffer, angle adjustment, height adjustment, etc. Another name for gas spring is dampers, support rods, angle adjusters, and gas supports.

Quality gas springs from a reputable manufacturer have a little quantity of the oil that lubricates the rod and the main seal. The oil enables the end of the stroke to remain damped. Proper maintenance of the gas spring is very essential if you want to enjoy it for a long time.  

Read on as we take you through things that can make the gas spring last longer. In the end, you will be able to take appropriate care of your gas spring.

Basic Recommendations for Maintaining Gas Spring

1. Angle Adjustment

One of the most important recommendations for integrating gas springs in your plan is to use an angle less than 60° from the vertical component.

2. Oil in the Gas Spring

The oil in the gas spring is very useful to provide a high damping outcome on the last end of the strokes. Note, if the gas spring is not used, no damping outcome will occur.

3. Oil Chamber

An oil chamber is an additional feature that enables the gas spring to last longer and operate optimally. It helps in fully damping the rod-up. Though it may cost extra money, it can save you from the breakdown of your device.

The Dos

It is essential to adhere to the following rules if you want your gas spring to last longer.

• Ensure the end fittings of the gas spring align to avoid side load force from applying to it.
• Ensure the use of standard gas springs rod down in your task.
• Ensure the provision of physical stops to avoid extremes of string
• For springs that are stored for future use, store it rod down for proper lubrication of the seal.
• Use ball joints to reduce side load.
• Use shorter springs near the hinge instead of the long springs.
• Endeavor to fully screw the end fittings of the gas spring.

The Don’ts

Some of the don’ts are:

• Do not dent, bend, scratch, or paint the rod.
• Ensure not to incinerate or puncture it.
• Avoid cycling it more than 15 revolutions per minute
• Avoid the temptation of re-filling the gas of the spring. It is a very risky and hazardous operation.
• Avoid exertion of eternal material on the side load forces on the end fittings or the gas spring.

Safety and Health

It is essential to consider your health and safety while maintaining a gas spring. In cases where people are in great danger during the fitting of the gas spring, it is advisable to use a locking shroud.

Give proper care during end fitting and positioning. The end fitting should be installed correctly to avoid extra load on the fitting at the time of use.

Contact Us for Quality Gas Spring

The role of maintaining a gas spring is very important for you. As a reputable manufacturer, we encourage you to buy quality products for your application.

Kindly contact us for your gas spring. Click here to view our products.