Considering cat-back exhausts replace more restrictions, they typically offer increased performance and noise compared to axle-back systems; however, they’re also more complicated to install…and more expensive. Every gear head is always looking to upgrade their car’s performance, sound, and look. One quick solution to all three of these aspects is a cat back exhaust system. A cat back exhaust is an exhaust system modification that increases airflow and look. "Cat back" refers to the parts of the exhaust system behind the catalytic converter (where the "cat" in the name comes from).

They directly bolt on to where the original exhaust sits and do not require any further modification. Cat back exhaust systems come with exhaust pipes, muffler and exhaust tips, so you have everything you need to replace the exhaust. The cat back is the section of the exhaust that runs from the outlet of the catalytic converter to the exhaust tips. Exhaust systems that include this often feature a large pipe running from the converter to the muffler, with mandrel-bent turns and glasspacks for reduced back pressure. Your go-to spot for information on the exhaust system, as well as mufflers, catalytic converters, pipes and sensors.

And a lot of people think that gearheads mess with it just to make our cars sound louder. Another problem is that the gaskets and seals can degrade over time, resulting in leaks. These leaks can usually be fixed by replacing the relevant seals and gaskets.

At Euro Car Parts, we have exhaust parts to help you do just that. It is important to note that the fuel saving will be more noticeable when traveling at freeway speeds than city driving, but if you spend a lot of your day on the road, you’ll likely notice the difference. View our technical tips to help you install, learn about and maintain your exhaust system the right way.

A stock system is designed to reduce and if possible eliminate all the noise produced by your vehicle. Because of this, the axle-back exhaust system does not impact the flow or pressure of the exhaust gases in any way. The axle-back exhaust system uses the factory exhaust pipe which does not have a large diameter. This offers even more breathing space for the engine thus better performance. Most cat-back exhaust systems are customized and not universal. One is to replace specific parts like with cat-back exhaust systems.

Although phosphorus is no longer used in gasoline, it (and zinc, another low-level catalyst contaminant) was widely used in engine oil antiwear additives such as zinc dithiophosphate (ZDDP). Beginning in 2004, a limit of phosphorus concentration in engine oils was adopted in the API SM and ILSAC GF-4 specifications. Although catalytic converters are most commonly applied to exhaust systems in automobiles, they are also used on electrical generators, forklifts, mining equipment, trucks, buses, locomotives, motorcycles, and on ships. They are even used on some wood stoves to control emissions.[5] This is usually in response to government regulation, either through environmental regulation or through health and safety regulations. Custom setups, especially for vehicles that do a lot of off-roading are also available.

One main reason for choosing to remain with a stock system is because it comes already installed on your vehicle. You should know the difference between a dual exhaust and a dual exit exhaust system. But it is easy to mistake a dual exit exhaust for a dual exhaust system. The materials are often 304 stainless steel or aluminized steel. The stainless steel is usually coated in special metals that make it corrosion-resistant. This means there will be a reduction in the amount of load on the engine, leading to higher mpg and fuel efficiency.

Finished in Panther Black Metallic over Onyx and Red leather, the car is powered by a 6.2-liter V8 linked with a six-speed automatic transmission and a limited-slip differential. Purchased by its current owner in February 2022, this G8 GXP is now offered with a reproduction window sticker, service manuals, a car cover, the removed exhaust system, a spare set of wheels, and a Michigan title. A catalytic converter is an exhaust emission control device which converts toxic gases and pollutants in exhaust gas from an internal combustion engine into less-toxic pollutants by catalyzing a redox reaction. Catalytic converters are usually used with internal combustion engines fueled by gasoline or diesel, including lean-burn engines, and sometimes on kerosene heaters and stoves. Whether you’re accelerating up a highway on ramp or passing slower traffic, improved acceleration lets you get up to speed more quickly. Gain horsepower, increase torque, and give your truck a more aggressive exhaust note with a new exhaust system.

When the exhaust mode is placed in "Sport" mode the exhaust system broadcasts an "Xtreme" level sound 6 decibels louder than the stock exhaust system. As the driver adjusts the exhaust mode to the "Normal" level, the exhaust produces an exhaust note more closely resembling a CORSA "Sport" level exhaust note. At Mishimoto we offer a variety of products such as intercoolers, catch cans, cold air intakes and more. Trust in Mishimoto's expertise and commitment to quality to deliver exceptional products for all your automotive needs. Mishimoto exhaust systems utilize high-flow mufflers for minimal flow restriction.

With over 66 years of breakthroughs and patents in high-performance gas and diesel engine development—including turbocharging and drivetrain, Banks has no rival. All Mishimoto products carry a Lifetime Warranty which includes accident protection. If you've installed any of our high quality products on your vehicle, please submit images of your ride/product to be featured on our social media accounts. Whether it’s wowing people at a show or getting every advantage over the competition on the track, our exhaust systems will help your car perform its best. They are usually the last systems to get addressed by performance drivers, who put a majority of work into turbo systems or custom tunes.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

You can also add other upgrades to give your Charger an extra performance boost. Visit the AmericanMuscle headers and exhaust accessories pages to find parts that fit your new cat back system. Mishimoto offers a wide selection of exhaust systems, including cat-back exhausts, performance exhaust systems, and aftermarket exhaust options, designed to enhance your vehicle's performance, sound, and style. Our exhaust systems are engineered with precision and constructed using high-quality materials to deliver improved exhaust flow, increased horsepower, and an enhanced driving experience. Enhance the sound and performance of your Subaru with our premium cat back exhaust systems. Designed to replace the factory exhaust system from the catalytic converter rearward, these cat back exhausts offer a deeper, more aggressive exhaust note while reducing restriction for improved airflow.

From cat-back ls2 exhaust manifold systems, emissions compliant catalytic converters, performance mufflers to custom exhaust parts, buy the automotive part your vehicle needs. In addition to boosting your horsepower, cat-back exhausts can make a massive difference to the sound of your car, especially if you choose exhaust tips designed for acoustics. Basically, catback exhaust systems upgrade regular exhausts, improving the flow of exhaust gases and the performance of your engine with wider pipes and smoother bends.

Different exhaust systems offer different noise levels and tones, but how? Sound quality and overall loudness of an exhaust system can vary significantly depending on the pipe diameter, size and design of the muffler, resonator inclusion, and the number of outlets. For this reason, all systems sold on RealTruck are filtered by noise level, including loud, moderate, and quiet. From the factory, most manufacturers employ small-diameter piping, restrictive mufflers, and noise-reducing resonators, significantly smothering exhaust flow and sound quality. A front pipe back system replaces a few key components of the OEM Honda or Acura exhaust found on your EX, Touring, Si, or A-Spec that are after the Front Pipe (the pipe that goes under the engine).

A catback exhaust system works by replacing the muffler and tailpipe with a more free-flowing design. Take full advantage of everything we have to offer with an upgraded CORSA exhaust. CORSA full exhaust systems help optimize performance and increase sound and will make heads turn in your direction every time you pass by. With our patented RSC® technology and unmatched customer experience, you'll see why we've been leaders of our industry for over 25 years. View our entire selection today, and find the CORSA exhaust that will leave your rides unrecognizable. If you have any questions about our high-performance exhausts, don't hesitate toreach out.

In addition, a cat-back exhaust can also improve your car's fuel economy. So, if you're looking for a way to get more out of your car, a cat-back exhaust is a great option. We now offer Maverick cat-back exhausts in bothall-wheel drive (AWD) andfront-wheel drive (FWD) configurations.

This modification includes the pipes, muffler, and sometimes the resonator. The term "cat-back" itself signifies that everything behind the vehicle’s catalytic converter is being upgraded or replaced. Milltek's Sport Catback Exhaust Systems are designed to compensate for the sound reducing qualities from the particulate filter and significantly improve the sound aesthetic of the exhaust system.

Walker is your one-stop exhaust shop, offering a full line of mufflers, pipes, hardware and accessories. Cat to Y pipe intersection showing after cat O2 sensor location. This qualifies as one of the STRANGEST stock exhaust parts I have seen. For some reason Toyota/Lexus decided to weld a straight section of 60mm pipe to the cat outlet flange, angle cut it, weld a 50mm pipe pipe that has its last couple of inches expanded to 60mm and match angle cut. Also note the O2 placement is in the 50mm sections of the Y pipe where the sensor tip takes up a good portion of the available flow area.

But with so many options available, it's easy to get lost in the world of aftermarket exhaust systems. While some companies may try to lure customers with an attractive price tag or flashy branding, it's quality of performance, sound, and construction that truly sets a great brand like Invidia apart from the rest. Transform your vehicle with the Roush Performance F-150 Cat-back Exhaust System, an ideal replacement for your factory exhaust system. Crafted from robust, corrosion-resistant T-304 stainless steel, this system features high-flow mandrel bends to enhance exhaust flow efficiency. Experience the thrill of enhanced acoustics and performance with this premium upgrade for your F-150. Banks patented exhaust systems enhance power, fuel economy, and sound by removing all airflow restrictions.

We match the exit size to the size exhaust you ordered, so if you are ordering this after the fact, please include the exhaust size you have in your order. Replaces the OEM catalytic converter with a free flowing pipe. Completely straight through (no bottleneck), free flowing mini-muffler and pipe. Replaces the OEM catalytic converter with a 3" metal substrate core high-flow performance cat and our mini muffler. The metal core is our highest flowing cat available and it willreduce... Rae is a very small 1000sqft shop, run by a dedicated team of two. Our motto, "Quality over quantity," drives everything we do and ensures the highest standards in every order.

Less restrictive catalytic converters paired with a cat-back exhaust system will offer high performance and power. Though, the level of horsepower gained is not constant across all cat-back systems. It depends on the quality and performance of the catalytic converters. Because of the better flow of exhausts resulting from the mandrel-bent tubing and the larger diameter piping, cat-back exhaust systems manage to offer better performance. IE offers catback, downpipe, and midpipes upgrades to replace individual sections of your exhaust. Installing variations of these parts allows you to dial in your exhaust volume to your preference, from sporty to aggressive.

There are loads of options, all offering different benefits, and the amount of research you do can quickly turn to frustration when you realise the minuscule differences between the many options. OE-quality exhaust products engineered for today's medium-duty and heavy-duty vehicles. The single 60mm is split into twin 50mm pipes to the twin silencers.

There are several factors to consider when selecting an exhaust system for your vehicle, including noise level, finish, price, style, and installation difficulty. As you move through the versions here, you’ll notice that the more complete the system, the more expensive it becomes. In exchange, you'll get more performance and sound benefit out of the system. To sweeten the pot, our exhausts come with significant savings once you start bundling multiple pieces together.

As a result, the glass pack mufflers end up producing sounds that are more aggressive and louder than the straight-through muffler. This is a little bit different from most original exhaust systems. Today we’ll focus on the cat-back exhaust systems and what makes them stand out. There are the header-back, turbo-back, axle-back and cat-back systems.

Featuring virtually indestructible 100% stainless steel, our patented TorqueTube headers maximize exhaust extraction to haul you up the grade. This Takeda cat-back exhaust system by aFe POWER delivers superior performance, quality, and good looks. By replacing the rear section of your exhaust with a quality cat-back car performance exhaust system, you can reduce the backpressure and allow your engine to cycle with more speed and efficiency. Thanks to their larger diameter pipes and high-quality mandrel bends, a good cat-back exhaust system will increase the efficiency of your car’s exhaust system, and with increased efficiency comes increased power. The exhaust system in your car directs fumes away from yourself and your passengers, improves engine performance and fuel consumption, and controls cabin noise.

Don’t deny yourself the perfect blend of sound and performance any longer. Give our team a call today for a cat-back exhaust system that will unleash the potential of your Maverick. I'm very pleased with this [Thermal RD] exhaust on my Maverick. Loud enough to let the people around you know you have an exhaust but not so loud as to wake up your neighbors at 4 am. During cruising you can barely hear it inside but it wakes up when you step on it. Definitely not obnoxious but gives the truck a performance sound.

Catback exhaust systems are popular among car enthusiasts because they can improve the sound and performance of a vehicle. From classic American muscle cars to the newest off-road capable rigs, STILLEN has you covered. Browse our most popular performance car, truck and SUV exhaust systems to find the ultimate exhaust experience for your vehicle. If you’re looking to enhance the performance of your car, you may have heard the term "cat back exhaust" being thrown around and wondered what is a catback exhaust exactly.

A cat-back exhaust system is one of the best ways to improve your car's performance. It replaces the stock cat-back exhaust system and gives your car a more aggressive sound. Perhaps the most significant benefit is the increased power that it can provide.

Installation was super easy, and did it myself with only ramps. When IE claims 'no-drone' they really mean it - the sound is perfect! The youtube videos do not do a good job capturing the sound quality, but trust me, it's the best overall setup for your car at a reasonable price point. Enjoy a tuned and enjoyable exhaust note without any raspy leaks ruining the show. Our exhaust system assembles with our wide-width stretch clamps designed to seal and pull your exhaust connections together.

Namely, it replaces the rear axle-back and tips and then a portion of what we refer to as the mid-pipes. This system is emissions friendly and doesn’t require any tuning. In New Jersey, vehicles must pass emissions testing to ensure they meet environmental standards. Since cat-back exhaust systems do not modify the catalytic converter or engine management system, they generally do not affect a vehicle’s ability to pass emissions testing.

Even a small leak can cause problems down the line, so it's better to be safe than sorry. By following these simple tips, you can ensure that your cat back installation goes smoothly and without any issues. When it comes to cat back installation tips, there are a few things you need to keep in mind.

Straight-through, or flow-through, mufflers have perforated baffles and packing material that provides a conservative level of sound absorption while still keeping sound output moderately loud. Glasspack mufflers perform similar to resonators due to their design and lack of sound-absorbing packing material, so they tend to be louder and higher pitched. For compression-ignition (i.e., diesel) engines, the most commonly used catalytic converter is the diesel oxidation catalyst (DOC). This catalyst converts particulate matter (PM), hydrocarbons, and carbon monoxide to carbon dioxide and water. These converters often operate at 90 percent efficiency, virtually eliminating diesel odor and helping reduce visible particulates. These catalysts are ineffective for NOx, so NOx emissions from diesel engines are controlled by exhaust gas recirculation (2013 ram 2500 egr delete kit).

Fine-tune your ride for the best performance and aesthetic today. Steeda offers the largest complete line of Ford-based parts and accessories for your build and is considered the largest privately owned Ford performance-based operation in the world. If you've been searching for the perfect place to purchase Ford automotive performance parts for your vehicle, then you're at the right place!

Shelby American is proud to announce the latest generation Shelby Ford F-150 Raptor, the most polished off-road truck ever we have offered. Add more products to wishlist by simply getting registered on Eurocarparts. One of the most important elements of your car, your exhaust is vital for preventing harmful gases from being released into your surroundings. When you notice damage or wear and tear, it's essential to fix them quickly.

Check out our cat back exhaust category and you’ll find systems that are built from stainless or aluminized steel. They also come in different tubing diameters to deliver varying ranges of exhaust volumes. Some of our exhaust kits even come with resilient powder coatings, so you can get an upgrade that matches your Charger’s appearance. Thanks to the large selection of products at AmericanMuscle, you can definitely purchase a cat back exhaust that can bring out your vehicle’s true high-performance potential.

Combined with our five different tip options, we've got you covered. We’ve had decades of experience perfecting exhaust style andtechnology and have developed custom exhaust systems considered too ‘niche’ by competitors. Many exhaust manufacturers use 400 series stainless steel to reduce costs and pad their profits. Additionally, the Maverick systems by Thermal offer a range of upgraded tip options that owners can choose from or change over time. Getting an upgraded cat-back exhaust system for yourtruck can enhance your performance and produce a great sound. Then there’s poor fitment and the dreaded drone that all too often accompanies aftermarket exhausts.

Exhaust systems also play a role in reducing noise levels, improving engine performance and reducing fuel consumption. To get the power level up to 785 hp, Shelby installs a Ford Performance supercharger, as well as a new carbon-fiber air intake tube, high-performance fuel injectors, and an aluminum heat exchanger. A Borla (cat-back) exhaust system rounds out the list of powertrain modifications.

Or are you a more relaxed driver who takes the roads less travelled? Knowing your driving style will help you pick a cat back that not only sounds good but also performs well. Lastly, you need to decide what material you want your cat back to be made out of. If you're looking for a way to enhance your car's performance and style, a cat back exhaust may be the perfect solution. All 1993, 1994, 1996 and newer vehicles that were manufactured with California or 50-State emissions certification.

Cat-back exhaust system kits come standard with tailpipes, a performance muffler and exhaust tips. The inclusion of our wider, mandrel-bent tailpipes means cat-back exhausts are your go-to for increasing your performance gains along with boosting your sound. While horsepower and torque gains vary from vehicle to vehicle, you can expect anywhere from a percent gain in horsepower and torque after installing a cat-back exhaust system.

Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through... Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

A spare set of 19″ Y-spoke alloy wheels is included in the sale, and they are shod with Bridgestone tires. The car is finished in Panther Black Metallic (80U) and features a GXP-specific front bumper cover and rear diffuser as well as a sunroof, fog lights, dual hood scoops, fender vents, and a rear spoiler. Imperfections are noted on the decklid and on a door and are also shown in the gallery. Our expansive inventory of Subaru performance parts ensures your vehicle not only performs at its peak but is also supported by our unparalleled customer service. At SubiSpeed, we understand that upgrading your Subaru is not just about selecting the right parts; it's about having a trusted partner every step of the way.

Invidia offers products known for their outstanding quality, and each finished piece is a work of art that sets them apart from the competition. For anyone looking to take their vehicle to the next level, Invidia is a name to remember. So, a cat back is used to indicate an upgrade to the stock exhaust system. And anyone looking to improve their ride should strongly consider a cat back exhaust system. This pipe will connect your mk1 downpipe that we sell for 1.8t, vr6, or aba 2.0, to the catback exhaust system. Therefore you need to check with your local state laws for legality.

The precious metals inside the converter, including platinum, palladium, and rhodium, are extracted. Ford Motor Company and Shelby American collaborated to create a stunning high performance concept vehicle based on the exciting and innovative Ford Mustang Mach-E GT platform. The big block Shelby Cobra is considered by many to be the most iconic American sports car in history. When GM began to work on a new big block Corvette and Ferrari increased the power of the V12 powered GTO's, Shelby and Ford Motor Company decided to shoehorn the mighty 427 FE motor into the Cobra. By combining Ford's incredible 6.7-liter Power Stroke® turbo diesel churning out 1,050 lb.-ft. Of torque with a Shelby tuned advanced off-road suspension system, the three-quarter ton truck delivers both serious off-road capabilities with best-in-class towing.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...

Federal Catalytic Converters are not legal for sale, installation or use in the state of California. It should be noted that a split system will often provide an aggressive noise increase, and some designs will split the two pipes to opposite sides of the vehicle. If you are looking to save a little money but still get most of the benefits of a cat back exhaust system, however, aluminized steel may be the way to go. Made from traditional steel that’s been coated on all sides with aluminum-silicon alloy, these systems are very strong thanks to the metallurgical bond which still provides a level of corrosion resistance. While the aluminum coating reflects heat well, the steel can corrode if the aluminum layer is chipped or scraped off. Most cat-back systems will come in either an aluminized or stainless steel version.

This picture is looking at the manifold end has a 60mm inlet ID and a 3 bolt flange where the outlet end has a 2 bolt flange and a 50mm outlet ID. Increasing your engine’s torque output gives you the power you need to haul heavy payloads and tow trailers, boats, campers, and more. The Carven-TR Series Performance Muffler delivers a deeper sound with a lower tone. Bradley’s Auto Service is proud to be affiliated with TechNet, a network of more than 12,000 locally owned repair shops that are focused on delivering quality care to the communities they serve. When you have any kind of automotive work done by us or another TechNet-affiliated shop, you are covered nationwide.

Our design concept is to provide a sporty and authentic exhaust note, while improving performance, and enhancing the visual styling of your vehicle. Each product is carefully developed, and then expertly crafted by our own factory. The whole reason I decided on an IE cat back vs mbrp or AWE was the craftsmanship. However I do live in warm and sunny south Florida so I know it will only see tons of rain but never salt or snow unless it’s an impromptu trip. I love the lil burble crack when going down in rpm and down ship. I wish it were a little louder but if that we my main goal I’d have just gutted cats n resonators n left stock mufflers.

All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market. Our catback design includes all sections to replace the factory exhaust tips, mufflers, and resonator up to the midpipes. Enjoy an unrestricted system that delivers the perfect exhaust note from your turbocharged V6 engine. A catback exhaust system replaces the muffler and tailpipe with a more free-flowing design. This allows the exhaust gases to flow more easily out of the engine, which can improve the sound and performance of the vehicle.

To make a very long story short so far so good I’m happy with the product. I had 1 dinged tip out of the 4 that prob happened during shipping n y’all already have a new replacement tip on the way so customer service is great as well. Only thing I would change as previously stated would be a little more noise but again that wasn’t my main goal to being with. Hats off to what y’all do and please make more B9 Audi S4 parts n I’ll happily buy them. I regret not buying the IE intake but hey sometimes we all make poor decisions lol. Every vehicle-specific CORSA product is engineered and designed to match the unique properties of the vehicle it is designed for to deliver perfect fitment and performance.

The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. You get the only the best with SPD's 3" resonator egr delete 2011 6.7 powerstroke pipes. These 304 Stainless Steel pipes are .. SPD's high performance stage 1 resonator cat-back pipe replaces your factory resonator pipe with a t..

Aftermarket custom cat back exhaust systems increase the efficiency of an exhaust system because of the mandrel-bent turns and reduction in back pressure. They are the popular choice when it comes to aftermarket exhaust systems as they offer reliable performance and sound without having to buy a new catalytic converter. They are also well-suited to those who like to handle their own installation!

The difference in fuel economy is, however, more obvious while driving on a freeway. They also do not offer the best performance due to many reasons. If you're looking for an off-road exhaust withmaximum clearance andanextremelynbs.. Sign up for the IE mailing list and stay up to date on new products, sales, giveaways, and promotions.

As a result, our popularity has increased, and we work tirelessly to maintain our quality systems while fulfilling orders. Please be aware that while we typically exceed our estimated wait times, we have been successfully operating for three years and no customer has ever been left without their system, or a cancellation/refund. At Rae, we are expanding our team and investing in additional resources and machines to ensure we stay at the forefront of innovation. With our ambitious plans, we are on track to meet demand and increase our inventory of premium parts by the end of the year. Please note that purchasing this product is agreeing to understand this concept. Amplify your vehicle's performance and sound with Full-Race's premium Exhaust systems - reliable power and efficiency harmonize with a brand that’s trusted for quality and performance.

Typically, this includes the pipe connecting the pipe from the catalytic converter to the muffler, the muffler, and the tailpipe or exhaust tips. Because these types of exhaust systems are installed after the emissions monitoring systems of a vehicle, they won’t impede its ability to measure emissions. However, you must be aware of your local noise regulations and adhere to them. With relatively short install times when using a high-quality system from MagnaFlow, exhaust modifications can yield the instant gratification of your ride sounding as fast as it looks. When you purchase an aftermarket exhaust system like a cat-back exhaust, you're in control of horsepower and sound output as pipe diameter and muffler type are in your hands.

The remaining waves produce the deepened and enriched exhaust acoustics you love. Stillen offers a variety of exhaust systems for many vehicles, both foreign and domestic. The muffler is a glass filled, large chamber design that provides the optimal amount of exhaust velocity for the engine while producing a great low rumble sound - without any annoying buzzing, "racer" sound. The high clearance fitment dramatically reduces the risk of getting hung-up on obstacles when off-roading. We’ve been helping customers with performance upgrades since 2006, and have a staff full of people who can help answer your questions. Our customer service — from our low prices to our fast shipping — has earned us a reputation with a legion of fans.

Each cat-back exhaust system is made from high quality components and assembly so you can get the performance you want at a price you can afford with the assurance you need. Please note Quad Tips are available with optional Carbon RR Racing Tips! (see photo of our new tips in the image library for this product)This is our signature full cat-back exhaust system for Lexus ISF.

Cat back exhaust systems are a great way to enhance the performance and look of your vehicle without having to take out a small loan. An average exhaust will start at around $300 and can go up to anywhere around $3000. You will be able to find a cat back exhaust system for just about every make and model of a vehicle, and they are easy to install, making them great for people who love a bit of DIY.

Unlike your stock system, CORSA exhaust systems don't utilize performance-robbing restrictions that reduce airflow, such as chambered designs, baffles or spring-loaded valves. With wider tubing and our mandrel-bent design, your new full exhaust system will allow for reduced backpressure and provide cleaner oxygenized air to your engine. You'll see benefits like increased horsepower, torque boost and better fuel economy.

Since 2003, we have specialized in building BMW M-models (and Tesla) with a refined selection of industry-leading, high quality products. Our 8,000 sq/ft installation facility and shipping headquarters is located in Anaheim, California. IE's advanced DroneTrap technology captures the pulse waves responsible for your B9 3.0T engine's exhaust note and draws them into dual mathematically tuned resonators. The internal ports are engineered to resonate these waves against each other in a process that selectively cancels out those responsible for annoying drones.

Typically, that includes a mid-pipe, muffler, tailpipe and tips. Cat-backs generally yield increases in performance, due to the more efficient flow of exhaust through upgraded parts like larger diameter tubing and better flowing mufflers, as well as improved sound and reduced weight. For starters, the "cat" in catback exhaust system is short for "catalytic converter", a central part of your car’s emission control system, which cat back exhausts are fitted behind, hence the "back". This relatively simple mod helps to free up exhaust gas flow and improve the noise of your engine by swapping out part of your exhaust system with a specially designedcar performance exhaust system. These three reactions occur most efficiently when the catalytic converter receives exhaust from an engine running slightly above the stoichiometric point. For gasoline combustion, this ratio is between 14.6 and 14.8 parts air to one part fuel, by weight.

Follow us on Facebook, Instagram, YouTube and Twitter to stay up to date on our latest products, projects, and adventures. Join the conversation and show off your ride with #MagnaFlow for a chance to be featured. Overall, cat back systems are relatively low-maintenance and easy to keep in good working order. There are a few common problems that can occur with cat back systems, but fortunately, they are relatively easy to fix.

Because the success of a catback exhaust systemdepends on various factors – like catalytic converter restrictions, engine power, etc. – there’s no easy way to calculate how much horsepower you stand to gain. If you have a restrictive exhaust, then a cat back exhaust could massively improve your car’s performance, and contrastingly, if your exhaust already flows well, then a cat-back won’t be much of an upgrade. In Colorado, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information.

If youhave modified your 4×4with lifted, lowered, or air type suspension systems, you can opt for a specially designed cat-back system with more pipe curvature before the rear axle. This is necessary for off-roading as it allows a higher degree of wheel travel and greater clearance for reduced-height springs and airbag suspensions. The custom exhaust systems available let you pick from a selection of pipework that allows you to adjust the exhaust to suit your noise preference. Are you looking to boost the power and efficiency of your vehicle?

A cat back exhaust system is one of the most popular aftermarket upgrades for performance-minded drivers. When deciding which type of exhaust system to choose, it is important to consider your needs and budget. If you are looking for maximum power and efficiency, a cat back exhaust may be the best option. However, if you are more concerned with cost and weight, a standard system may be a better choice. A cat back exhaust is one of the most popular upgrades for car enthusiasts.

At Thermal RD Performance, we have been developing quality aftermarket exhaust systems for decades. The materials we use are generally an upgrade from OE metals, and we incorporate our True Helmholtz Technology to eliminate cabin drone. This eliminates unwanted sound without restricting airflow needed for improved performance. Some three-way catalytic converter systems have air injection systems with the air injected between the first (NOx reduction) and second (HC and CO oxidation) stages of the converter. As in two-way converters, this injected air provides oxygen for the oxidation reactions.

Shelby American is celebrating the 100th anniversary of Carroll Shelby's birth with a truck built to perform both on and off the road. The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with... From their humble beginnings to becoming one of the most well-known companies in Brisbane and Australia we are experts in the fast developing future of new age vehicles and accessories.

By running pipes from the catalytic converter to the muffler and from the muffler to the exhaust tip, cat back exhaust systems improve exhaust gas flow, providing small performance boosts. However, your performance gains may be limited if your catalytic converter restricts gas flow, as a catback exhaust system is installed ‘downstream’ of the converter. Header-back systems are increasingly rare, namely because of modern emissions systems. Since removing your vehicle’s factory emissions components is highly illegal, the previous two options are more common. However, header-back systems are still available for some older, pre-emissions applications. In these cases, header-back systems offer more performance and volume than cat-back or axle-back systems; however, they’re also the most expensive and the most challenging to install.

If you've got questions about cat-back exhaust systems, pipe diameters, muffler type, or anything else, talk with our product specialists. All 1995 model year vehicles, and all 1992 model year or earlier vehicles. All model year vehicles that were manufactured with EPA or Federal emissions certification. Exhaust gases from the cylinders are collected in the exhaust system to prevent harmful fumes from entering the vehicle.

By freeing up the restrictions in the exhaust system, a cat back exhaust can help your engine to breathe more freely. This, in turn, can lead to a significant increase in horsepower. If you love cars just as much as we do, then you know that one of the best upgrades you can make to your vehicle is a cat back exhaust. But if you're not familiar with this term, don't worry – Vandemon Performance is here to break it down.

The DroneTrap system is wrapped up in our stamped multi-wall resonator that reinforces the housing inside and out. This high level of manufacturing protects the resonator from warping or splitting at the welds under exhaust movement. Prices stated here are only for sales within the continental United States and ordered via the ROUSHperformance.com web site. Prices for other territories and countries may vary due to shipping fees, duties, and other factors.

Another difference is with the material used in the cat-back exhaust system against that in stock exhaust systems. But the problem with a resonator is that it can cause restriction to the flow of the exhausts. In the end, this can end up lowering your vehicle’s performance. It is also more affordable and easier to install than other types of exhaust systems, including the cat-back exhaust system. Cat-back and axle-back exhaust systems are both aftermarket exhaust systems. A performance exhaust system, like the cat-back exhaust, allows for easy splitting into dual exhaust.

This will improve the throttle response and acceleration in naturally-aspirated cars. The same reaction will be found in cars with forced induction with the addition of less turbo lag or supercharger response. Cat-Back exhaust systems are the most popular, coveted, and sought-after modification that enthusiasts will initially perform because of the main reason, and that is the sound. All of the brands we carry offer exhaust systems that are the result of decades of research and development.

The cat back system’s pipes have a larger diameter than a standard set. So, your vehicle will get to perform better at a fraction of the work it outputs. Anaxle-back exhaust systemwill replace the components from the rear-axle back. While axle-back CORSA exhausts will provide some slight performance gains, their primary focus is to influence your exhaust notes. Different axle-back exhausts will offer different exhaust notes, so it's best to browse our entire selection to find the sound most suited for your vehicle.

All are capable of delivering a race-inspired exhaust note along with more power and torque. And this is why cat-back exhaust systems are considered to be one of the best performance modifications that are rewarding in power and sound and are highly effective for all driving purposes. Aside from maximizing your sound gains, the RSC® technology in every CORSA high-performance exhaust allows for a completely free-flowing air path to optimize your performance with every drive.

That means a full exhaust system is a one-way ticket to overtaking cars on the road with ease, fewer trips to the gas station and more power behind your acceleration for when you need it the most. Discover the true power a high-performance exhaust system can bring to your truck or car with CORSA PERFORMANCE. CORSA has remained a leader in aftermarket performance exhaust systems through advanced engineering and constant innovation for over 25 years. Each CORSA exhaust utilizes our patented Reflective Sound Cancellation® (RSC®) Technology and top-of-the-line materials for a truly aggressive sound without any annoying drone during cruise. Enhance your driving experience and see what sets us apart from the competition with a CORSA axle-back or cat-back exhaust system today. Adding a cat back exhaust system is a great way to increase horsepower and improve sound for your vehicle.

There are subtle changes on the outside to let onlookers know that this is no ordinary F-150, such as a custom dual-intake hood, a custom front fascia and grille combo, and Shelby badging. For the interior, Shelby adds carbon-fiber trim, billet racing pedals, custom floor mats, and a serialized plaque. For lean-burn spark-ignition engines, an oxidation catalyst is used in the same manner as in a diesel engine. Emissions from lean burn spark ignition engines are very similar to emissions from a diesel compression ignition engine. Upon failure, a catalytic converter can be recycled into scrap.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

The products of REMUS Innovation Forschungs- und Abgasanlagen Produktions GmbH („REMUS") are distributed worldwide. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition. Discover MagnaFlow's latest evolution in performance exhaust technology. Stainless steel is the most popular choice for cat backs because it is durable and has a deep, throaty sound. But if you're looking for something lighter weight, you can also find cat backs made out of titanium. So, when it comes time to choose the right cat back for your car, keep these three things in mind and you'll be sure to find the perfect fit.

Shelby American is pushing the latest generation Shelby GT500SE supercar to new levels. As the first Carroll Shelby Signature Edition version for this model, the car delivers sizzling styling, razor sharp handling and an additional 40 horsepower. The 2024 Shelby Super Snake is the pinnacle of our performance cars based on Ford's next generation S650 Mustang sports car. Gases are pulled from the cylinder head by the exhaust manifold, at which point they are removed via the exhaust at the rear of the vehicle.

All performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. Milltek believes in continuous evolution, and their research development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market. If you're looking to customize your vehicle's exhaust system, Mishimoto also offers a range of aftermarket exhaust options. These exhaust systems are designed for specific vehicle models and provide a combination of performance, sound, and visual enhancements.

To maintain catalyst efficiency, the air–fuel ratio must stay close to stoichiometric and not remain rich or lean for too long. All of Milltek's performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that Milltek's products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. If you are looking for something a little more unique, you can opt for a split rear or custom cat back exhaust system design. The split models feature an exhaust pipe that, as the name suggests, splits into two side-by-side pipes at the end, often with polished muffler and exhaust tips to really make a visual impact. The wider pipes of a cat back exhaust system mean that your vehicle is able to breathe better.

The installation of a cat-back exhaust system is fairly easy, but this too depends on your vehicle’s make and model. But, compared to the alternative, they are the easiest way of improving your vehicle’s performance without breaking the bank. As a result, the engine gets to breathe better and so release more torque and horsepower.

Our straight-through brushed-finished mufflers are configurable to your desire, smoothing the exhaust note to a deep growl, without adding restrictions, rasp or drone. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. A cast 3" to dual 2.5" rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. Finally, removable 4" polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. In addition to high-quality materials and components, the design of each high-performance exhaust system allows for easy, bolt-on installation right out of the box. CORSA exhausts require no welding and can mount directly to your factory connections.

You’ll save right away when you add a front-pipe and a downpipe to your base system over buying each of these individually. Many car fanatics love a unique sound for their ride, almost similar to a racecar. It’s no secret that the standard vehicle exhaust system won’t produce a roaring or distinguishable sound. This is where a back cat exhaust system will be favorable to any motorist. The upgraded system will give you a more enjoyable, louder ride. But this is where certain systems will do better than others, so be sure to look into which one will be right for you.