Elevator for drywall: a review of factory models and recommendations for the assembly of homemade
And the instructions on how to make a homemade copy will give you the opportunity to make an alternative decision to buy. Hoist for gypsum plasterboard sheets gives significant advantages during operations with gypsum plasterboard sheets in comparison with the implementation of all works by hand:.

While the lifter holds the gypsum board in a given position, the installer screws it on. A lightweight sheet of drywall can be transported to the desired location by securing it in the lifting mechanism. In construction stores you can find the following devices for mounting drywall to the ceiling:.

I recommend choosing a model of the drywall panel hoist, the lifting capacity of which is not less than and kg, because the weight of one plasterboard sheet can range from 20 kg to 34 kg.

Selection criteria

The lifting height of the purchased model should not be less than cm, so that it was convenient to use even in rooms with high ceilings. It is noteworthy that it costs, despite its high performance capabilities, inexpensively. Models, whose design has unreliable plastic elements, I recommend to ignore. As practice shows, their service life is short, and the risk of sudden breakage during operation is very high.

The first thing you will need when you decide to make a hoist for drywall with your own hands are drawings. There are enough of them on the Internet, choose at your discretion. An example of one of them:. Four basic nodes should be highlighted, which you need to think through for your elevator and implement:. Use wheels with locking mechanisms to prevent the elevator from moving while screwing on the drywall sheet.

The H-shape is best for securing a drywall section in one position. The winch provides a mechanized drywall lift that one person can do. You've seen how you can assemble a drywall hoist yourself and the most popular factory models. The video in this article contains additional materials.

Types and features of elevators

Finishing drywall surfaces that are at a considerable height, such as ceilings, is quite difficult. Plasterboard sheets have considerable weight and size, it is extremely inconvenient and tiring to hold them even for a long time by two people.

Professionals have long found a solution to this problem, using purchased lifting mechanisms. But what to do if you do not want to spend money on them? Owning some skills, to make a hoist for drywall with your own hands is quite possible.

The main purpose of the elevator for drywall is to deliver and hold a sheet of drywall at the desired height during installation. This not only makes the work much easier, but also makes it possible to perform installation of drywall alone. Naturally, folk craftsmen quickly adapted the elevator and to perform other related tasks:.

Functions of elevators

The most practical is a universal elevator, the working surface of which can change the level of inclination. Industry offers many types of these devices, but they are not cheap. Usually they are purchased by construction teams specializing in the installation of plasterboard structures. But they often prefer to make the hoists themselves. If there is no possibility or desire to make the device yourself, you can buy it.

According to the device it is not much different from the usual rack-and-pinion car jack, but it is this simplicity that ensures the reliability of its mechanisms. Coupled with a fairly democratic price, it allowed him to take quite a solid niche in the market elevators.

The telescopic boom provides a lifting height of up to 3.3 m, and the retractable boom allows you to increase it to 4.5 m. Ready-made products do not always suit craftsmen, and extra costs do not add to their popularity. Therefore, many people prefer to make a hoist for drywall with their own hands, and the drawings are taken from various resources on the Internet or design the device themselves.

It is better if the table will have the function of turning: this will not only facilitate the loading of drywall, but also make the device versatile. Gypsum board is a versatile material for construction, produced in thin 6. Whole sheets are usually used for cladding ceilings and walls, so it is difficult to install drywall alone. A drywall lifter is a device that allows one person to install drywall panels.

Elevator universal, suggests unusual ways to use, and the simplicity of design allows you to make it with your own hands. The simplest and most compact, is a jack for drywall.

The purpose of use is to lift a sheet of drywall to the ceiling and hold it there.

The platform is in the vertical plane. The peculiarities of the lifting mechanism are determined by the fact that the device must move close to the wall.

Home craftsmen do not see the need to purchase a drywall elevator, and some had no idea of its existence. This device is not necessary to have at hand, if when working with drywall there is an assistant, but two people apply a lot of force to fix the sheets on.... It is not necessary to have this attachment handy if you have a helper to work with the drywall, but two people use a lot of force to attach the sheets to the ceiling. In a situation where there is no one to help, you can not do without this device, you can buy it ready-made, or build a hoist for drywall with your own hands.
Elevator is more massive, often has a counterweight to hold the drywall. Has three or four legs and provides stability of the entire device. It is desirable to choose a model on wheels, which will make the elevator more mobile: it will be easy to correct the position of the plasterboard, move over long distances.

The wheels should have stops to fix the device in the chosen place. Represents a telescopic tube with adjustable height. The height reaches 4.5 m and is inversely proportional to the weight the device can bear: 1.5-meter lifts up to 85 kg, 4.5-meter - no more than 60 kg.

Self-made hoist for drywall: drawings and instructions

Be mostly manual, but also meet automatic. When choosing a model, the quality of the internal mechanism should be paid special attention, as it is the most exposed to wear and tear.

Made in the form of a rectangle with cross bars to support a sheet of building material over the entire area. Lightweight structures are H-shaped. On the sidewalls there are fasteners for the gkl.

Finishing gypsum plasterboard surfaces that are at a considerable height, such as ceilings, is quite difficult. Plasterboard sheets have considerable weight and size, it is extremely inconvenient and tedious to hold them, even with two people for a long time. Professionals have long found a solution to this problem, using purchased lifting mechanisms. But what to do if you do not want to spend money on them?
It is desirable that the beams of the platform were movable - it will allow you to lift building materials of different sizes. In the most convenient models, the platform is attached to the rack by hinges and can become at an angle. This makes it easier to put the plates on the holder, and makes it possible to use the device on inclined and vertical surfaces. It is convenient when the lifting device is collapsible: the compact drywall elevator is easy to transport.

But this can have a negative impact on its durability. All parts of the mechanism should be made of strong, durable and light metal. In poor-quality products, the frame of the rack will quickly break, the teeth of the winch will wear out and the hinges will break.

If for any reason factory models do not suit - low strength, low functionality or not compact enough - the question arises how to make a hoist for drywall with their own hands. But it requires the ability to handle a welding machine and a bolter.

Elevator for drywall

The scheme of the internal mechanism of the homemade hoist for drywall is simple: a telescopic base with a platform, fixed on a tripod. But before you start assembling, it is better to get acquainted with the internal structure of ready-made prototypes. And in the process of making an elevator for drywall with their own hands, it is better to have the drawings at hand. Detailed master classes and drawings of the telescopic drywall elevator in large numbers are posted on thematic websites and forums.

A high estimate is provided by the following advantages:. It can be used to install shelves, ventilation systems, heavy equipment, make repairs at height and other unusual operations. The assembly diagram comes with the kit. Not always the use of factory and homemade elevators is strictly according to the instructions. The design of the device makes it versatile in construction work. There are various devices to simplify installation work. Choose the right one, show your ingenuity, and the repair with your own hands will be a pleasure.

If the installation is one-time or the volume of repairs is small, you can install the sheet with one helper.

The master does not need to fit or align parts, it is enough to screw in self-tapping screws. No need to simultaneously hold the drywall sheet or call for help from a partner. Devices of standard design can be used in rooms of different purposes: living rooms, narrow corridors, on the balcony, loggia, large areas of public, commercial or industrial sphere. The easiest way to buy a ready-made structure in a construction supermarket.

Source:  https://svop.org/