The earliest varieties of powder coating were created in the early 1950s as a result of the high demand for vehicles in the United States. The ongoing simplification of the network of subcontract suppliers prompted manufacturers to pursue the "holy grail" of a single coat system. Powder coating, as we now know, may be better defined as a solid paint in combination with early signals from environmental pressure organizations.

The application speed and consistency of the high-performance coating cycle have benefits over existing traditional spray enameling processes. Powder coating can replace the traditional etch prime, primer, and possibly two layers of topcoat with a single process.

Some of the first instances of plastic or powder coating included merely immersing a pre-heated component in an aerated or fluidized powder vat. The fine powder was put in a container on top of a fine membrane, and compressed air was pushed through the membrane in a regulated amount.

The powder then bubbled and doubled in volume, and the heated components were immersed in this bubbling fluid for the period dictated by the thickness of finish required and the quantity of sink retained by the segment.

This was powder coating in its most basic form, with little or no performance or appreciating features, but it did have the evident benefit of speed and, as a result, cost savings. Powder coating, on the other hand, has transformed the industry today. It is regarded as the best type of coating.

From powder dipping to powder spraying to the basic spraying devices of the 1960s and 1970s, application devices have now advanced to state-of-the-art technology. However, the three basic components of the process are as important as they have always been: (a) pre-treatment, (b) application, and (c) component curing.

Powder coating services understands the importance of powder coating metal finishing for a wide range of sectors, including industrial manufacturing, metal fabrication, and automotive components. Machine shops often rely on Rustylions for superior finishing services. For powder coating services, call Rustylions Powder Coating at 1 347 613 8103 or 973 459-8515.