Everyone knows that the LCD splicing screen adopts the splicing method of building blocks. Pieces of splicing screens are stacked, and can be wall-mounted, floor-standing, cabinets, etc., then everyone knows that these methods can also make the splicing screen into an arc. splicing large screen? Below, I will share with you all the knowledge in this area.

1. Why do curved splicing screens?

Why should a whole piece of LCD splicing screen be curved? There are two main reasons:

1. For objective reasons, the position of the LCD splicing screen is slightly worse, and it cannot be placed. For example, the length is 6 meters, and a 3X5 55-inch LCD splicing screen is to be made. Then the length is 6.065 meters, which is so few. centimeters, what should I do? That is to make the installation cabinet slightly curved, so that the splicing screen can be put in, without affecting the previous design of the splicing screen;

2. For the reason in charge, some users feel that the flat screen is too ordinary and has no special features, and they want to make a curved splicing screen, which is one of the reasons why there are curved surfaces in TVs, monitors, etc. , which is also a big reason.

2. The scheme of curved splicing screen

After all, the curved splicing screen is a different splicing mode, and its solution will be a little more complicated. Here, we generally divide it into two types:

1. OLED splicing screen, OLED splicing screen is a new type of large screen with a single screen that can be bent. It can be customized according to the radian desired by users. At present, 55-inch oil can be used, but OLED screens are used in civilian display products. It has been popularized, such as: mobile phones, tablets, notebooks, etc. As for OLED splicing screens, there has not been a large number of productions. This is an ultra-high-end curved splicing screen solution. See the figure below:

2. Conventional LCD splicing screen, if the LCD splicing screen wants to realize the curved splicing style, the first condition must be met, that is, there are enough screens, such as: 2X2 LCD splicing screen, if you want to be curved, it is really a clever woman It is difficult to cook without rice. If you want to achieve a good-looking arc effect, according to the experience of the editor, you must achieve a combination of more than 3X5, so that the effect can be obtained. Second, the design of the mounting bracket, which is arc splicing The important one is bad.