SAPREPARTS FOR SMALL WIRE NAIL MAKING MACHINE

• Sharpening dies: this machine is to sharpen the head of steel wire before it is feed into the wire drawing machine, the principle of the drawing machine is that using different size of drawing dies, for example, to draw steel wire of 6.5 mm to 3.8 mm, we can use a drawing die of 3.8mm, sharpen the head of 6.5mm steel wire less than 3.8 mm first, then put the head into the die, then fix the head of the wire to the wire drawing machine, then start pulling. After the wire comes through the die, all the wire becomes the diameter of 3.8mm.
• Nail knife grinder: because after 1-2 days cutting, the nail knife installed on the wire nail making machines will become blunt, then you can use the nail knife grinder to grind the nail knife to make it sharp again.
• Gripping Dies: Machines are provided with round dies having 8 or 10 nail holding grooves
• Cutting Die: For cutting nails and making point after the head shank are formed Diamond, Chisel, Round, Long or Blunt shaped Points can be made by grinding the tools appropriately 
• Header Dies: Used for forming a nailhead Chequered or Plain Heads can be formed with these dies
• Nail Cutter and Die Grinder (supplied with a motor, Emery wheels and Pedestal Stand)
• Optional Accessories: Additional sets of Tooling (Set of Gripping Dies, Cutting Tools and Header Dies)
• Standard Accessories: Electric Motor, Starter, Belts, One set of Tooling, Wire Stand and Hand Operated Lubricating Pump
• Further is the NAIL MAKING MACHINE PRICE IN CHINA.

AUXILIARY EQUIPMENT FOR NAILS MAKING MACHINE

• Punch pin and nail Moulds.
• Connecting welding machine: in case the wire breaks during drawing, you can use the butt welding machine to weld the broken wire together, then continue the drawing. without this machine, if the wire breaks, you need to sharpen the wire head again and do all things from the start.
• Nail Polishing Drums (with a motor, starter, and belts)
• Wire Drawing Machine (WE OFFER A COMPLETE WIRE DRAWING LINE TO DRAW NAIL WIRE IN VARIOUS DIAMETERS FROM 6 mm or 5.5 mm WIRE RODS)

HOW TO GET RAW MATERIALS

• Normally, you can buy from the local market or steel company.
• If they can sell low carbon iron wire rod Q195,6.5mm/5.5mm. You can buy and use a wire drawing machine to draw to the thickness you need.
• If better, you can get the thickness nails making wire you need.
• And if local no wire rod and nails making wire, better import from China for any type of them.
• What should import, depend on how is the quantity you want to produce daily output.
• If quantity not much, you can just import nails making wire.
• But if your quantity huge, better buy a wire drawing machine to draw for yourself using.
• Then you can start a Fully automatic nail making machine to make nails.